Login

Country

Cart

Your cart is empty
Pavé cubic zirconia bypass ring in solid 14K & 18K gold — Kavseyn
Pavé Bypass Ring in solid 14K & 18K gold, view 2 — Kavseyn
Pavé Bypass Ring in solid 14K & 18K gold, view 3 — Kavseyn
Kavseyn

Pavé Bypass Ring

Sale price$1,010.00
★★★★★4.93 · 112 customer reviews on Etsy
  • Solid 14K / 18K gold, stamped — never plated, never filled
  • ~3.8 g of gold — the metal holds its value
  • Made for you in your karat, color & size — ships in 1–3 days
  • Free insured US shipping · 30-day returns
Karat:
Color:Yellow Gold
Size:
Ring Size Guide

Every Kavseyn ring is made to order in solid 14K or 18K gold — so it's worth taking a minute to get your size right. We offer full and half sizes from US 4 to 12. Pick the method that suits you.

Measure a ring you already own

The most accurate method. If you have a ring that fits the finger you're buying for, start here.

  1. Pick the right ring. Choose one that sits comfortably on the finger you plan to wear your Kavseyn piece on — fit differs from finger to finger, and between hands.
  2. Lay it flat. Place the ring on a flat surface, on top of a ruler marked in millimetres.
  3. Measure the inner diameter. Measure straight across the inside of the band — from the inner edge on one side to the inner edge on the other, through the centre. Don't include the metal itself.
  4. Read it in millimetres and match it to the diameter column in the chart below. Half sizes matter: 16.5 mm is a US 6, while 16.9 mm is a US 6.5.

Tip: measure the same ring two or three times and take the average — half a millimetre is a half size.

Measure your finger

No ring to go by? All you need is a strip of paper, a pen and a ruler.

Cutting a narrow strip of paper to measure ring size — Kavseyn ring size guide Step 1

Cut a paper strip

Cut a strip of paper roughly 10 cm long and no more than 1 cm wide. Keep it narrow — a wide strip bunches up around the finger and gives you a reading that's too large.

Wrapping the paper strip around the base of the finger — Kavseyn ring size guide Step 2

Wrap it around your finger

Wrap the strip around the base of the finger you'll wear the ring on. It should sit snug — close to the skin, but loose enough to slide over your knuckle. If your knuckle is wider than the base, measure the knuckle instead.

Marking the overlap point on the paper strip with a pen — Kavseyn ring size guide Step 3

Mark where it overlaps

Holding the strip in place, mark the exact point where the end meets the rest of the strip. A fine pen or pencil line is best — a thick mark can cost you half a size.

Measuring the marked paper strip against a ruler in millimetres — Kavseyn ring size guide Step 4

Measure it with a ruler

Unwrap the strip, lay it flat and measure from the end to your mark in millimetres. That length is your finger's circumference — match it to the chart below, half sizes included.

Tip: measure at the end of the day, when your hands are warm — fingers are at their largest then. If you land between two sizes, take the half size above.

US ring size chart

Every size below — full and half — is available on all Kavseyn rings.

US size Inner diameter Circumference
4 14.9 mm 46.8 mm
4.5 15.3 mm 48.0 mm
5 15.7 mm 49.3 mm
5.5 16.1 mm 50.6 mm
6 16.5 mm 51.9 mm
6.5 16.9 mm 53.1 mm
7 17.3 mm 54.4 mm
7.5 17.7 mm 55.7 mm
8 18.1 mm 57.0 mm
8.5 18.5 mm 58.3 mm
9 18.9 mm 59.5 mm
9.5 19.4 mm 60.8 mm
10 19.8 mm 62.1 mm
10.5 20.2 mm 63.4 mm
11 20.6 mm 64.6 mm
11.5 21.1 mm 65.9 mm
12 21.4 mm 67.2 mm

Good to know

  • Mind the knuckle. The ring has to clear it — if your knuckle is wider than the base of your finger, size to the knuckle.
  • Wide bands run snug. For bands 6 mm and wider, go up half a size.
  • Temperature matters. Fingers shrink in the cold and swell in the heat — measure when your hands are at room temperature or warmer.
  • Between sizes? That's what half sizes are for — and if you're still on the fence, take the larger one.

Still unsure? Email us before you order — every piece is made to order, so we'd rather get it right the first time.

Two paths of light, crossing in style. The Pavé Bypass Ring sweeps its open ends past each other across the finger, each lined with pavé-set cubic zirconia — a fluid, modern silhouette wrapped in continuous sparkle.

Crafted in solid 14K or 18K gold — never plated, never filled — so the brilliance is real and built to last. The bypass curve elongates the hand while the pavé rows trace every movement with light.

Love the bypass silhouette? Match it with our bypass bangle collection for a coordinated set.

Materials & Specifications
  • Metal: Solid 14K or 18K gold — never plated, never filled
  • Approx. weight: 3.8 g
  • Stones: Pavé-set cubic zirconia
  • Design: Open bypass silhouette, high-polish finish
  • Colors: Yellow, white & rose gold
  • Sizes: US 4–12, including half sizes
Craftsmanship

Crafted in solid gold and finished by hand by master jewellers. Never plated, never filled — the gold runs all the way through, so it holds its color and value for life. Every piece is made to order in 1–3 business days, inspected, and ships from CA.

Shipping & Returns

Free insured U.S. shipping — ships from CA. Your piece is made to order in 1–3 business days, then delivered in 1–3 business days. Returns and exchanges are accepted within 30 days of delivery in unworn, original condition — see our Return Policy for details.

Care: keep dry, store separately, and buff gently with a soft cloth to keep its shine.
Pavé cubic zirconia bypass ring in solid 14K & 18K gold — Kavseyn
Pavé Bypass Ring Sale price$1,010.00

Free insured U.S. shipping

On every order — ships from CA.

Solid 14K & 18K gold

Never plated, never vermeil.

Crafted to order

Made for you and finished by hand.

Secure checkout

Encrypted payments — shop with confidence.